M7

2019-2020 CATALOGUE

(19 Needle Set) 3x180 m/m SN-268 for SN-1268 / SN-1368

SPECSPad Diameter: 4"Spindle Size: 3/8"Free speed 11000 RPM6CFM / 90PSIOverall length 230mmMotor: 0.78 HPNet weight: 1.81kgAir hose 3/8"Sound press...

SPECSPad Diameter: 5"Spindle Size: 3/8"Free speed 11000 RPM6CFM / 90PSIOverall length 230mmMotor: 0.78 HPNet weight: 1.81kgAir hose 3/8"Sound press...

M7 AIR ANGLE GRINDER 3/8" LEVER TYPE THROTTLE

Features:Free speed : 11000 rpmExtra Heavy DutyAvailable with imperial or metric spindle sizes - Spindle Size - M14 x 2.0Safety lever throttle1.3 H...

FEATURES+ Rear exhaust.+ Powerful 0.8 hp motor provides sufficient power for most grinding necessities.+ Composite material housing reduces the wei...

Features: + Strengthened motor design can reach 1.3HP.+ Metric and inch spindle design can meet accessory demands in every market.+ Spindle lock en...

FEATURES+ Rear exhaust.+ Powerful 0.8 hp motor provides sufficient power for most grinding necessities.+ Composite material housing reduces the wei...

FEATURESPin-Clutch design mechanism generates 100Nm torque output.Fasten to Stop design provides comfortable feel.Square Drive 1/2"Torque Range: 10...

Belt size 10x330mm Free speed 16000 RPM90PSIOverall length 320mm Net weight 0.95kgAir Hose 3/8" Sound pressure 88dBAVibration level 1.0 m/s2

Air blow gun (JC-410C) by M7.Air Inlet: 1/4". nozzle Length: 10".This product is made of high-quality materials to serve you for years to come. Des...

Mighty Seven M7 M7-JC412 300mm (12") Bent Nozzle Air Blow GunM7 Air blow gun with a bent nozzle that's 300mm in length.Features:305mm (12") Bent No...

FEATURESSteel nozzle provides long life on the tool.Used for cleaning.Special Hi-tech material provide durable, quiet and comfortable operation pre...

Specifications:Nozzle Length 1.02 mmNozzle Length 40"Working Pressure 75-120 psiMax Pressure 150 psiAvg. Air Consumption (1/4" Hose) 13 cfmAvg. Air...

Specifications: Nozzle Length: 40"Workinng Pressure: 75-120 PSI / 5.3-8.5 (bar)Max pressure: 150 (PSI) / 10.6 (bar)Avg. Air Consumption: 13.0 (CFM)...

M7 Air Blow Gun Bent Nozzle 125mm M7-JC405Features:Bent nozzle: 125 mmSpecifications:Nozzle Length 125 mmNozzle Length 5"Working Pressure 75-120 ps...

+ Special air flow design to reduce vibration 30%.+ streamline modelling for better ergonomics.+ Long stroke to raise work efficiency 20%.+ Cylinde...

Chuck Size 14.8mmStroke Length 75mm2500 bpmAvg. air consumption 10CFMAir pressire 90PSIOverall length 395mmNet weight 7kgAir hose 1/2"Sound pressur...

Chuck Size: 0.68"/17.2 mmStroke Length: 75 mmBlow Minute: 2500 bpmAvg. Air Consumption: 10.0 CFM/283 L/minAir Pressure: 90 PSI/6.3 barOverall Lengt...

M7 Air Chipping Hammer Round Shank 3.5" Stroke With Chisel

M7 Air Chipping Hammer Round Shank 5" Stroke With Chisel

M7 Air Chipping Hammer Round Shank 6" Stroke With Chisel

Excellent for cutting rusted bolts, nuts, motor exhaust clamps or hangers, sheet metal,fiberglass etc.Belt Size - 75mmFree Speed - 22000 RPM5.0 CFM...

M7 Air Die Grinder 1/4" Collect 5" Extended

Specifications:Collet Size 1/4" & 1/8"Free Speed 25000 rpmAir Requirement 10 cfm / 90 psi / 1/4" inletOverall Length 190 mmRated Power 0.3 hpNe...

M7 AIR DIE GRINDER 6MM & 3MM STRAIGHT 25000RPM

Specifications:Collet Size 6MM & 3MMFree Speed 25000 rpmAir Requirement 10 cfm / 90 psi / 1/4" inletOverall Length 190 mmRated Power 0.3 hpNet ...

SPECSCollet Size: 6 & 3 mmFree speed: 25000 RPM10 CFM Air pressure: 90 PSIOverall length: 280mmMotor: 0.3 HPNet weight: 0.63kgAir hose: 3/8"Sou...

FEATURES:+ 90° working angle provides wide flexibility in confined areas.+ Both 3mm and 6mm or 1/8” and 1/4'' collets are included.SPECS:Collet siz...

FEATURESSingle direction of revolution.Handle exhaust efficiently reduces noise and directs air from working area.Side handle bar is included, whic...

M7 AIR DRILL 3/8" WITH KEYLESS CHUCK 2200 RPM

AIR DRILL!! This listing is for: 1 x M7 Air Drill Reversible 1/2" w/ Key Chuck Key Features:Free speed: 1100 rpmQuiet operation Key Specs:Chuck ...

M7 AIR HAMMER CHISEL LIMITER SPRING

+ Alloyed steel cylinder & piston improves the lifetime.Chuck size - 10.2mmStroke lenght - 67mm3200 bpm4.0CFMNet weight - 1.7kg 98 dBA

M7 Air Hydraulic Riveter 16Mm Stroke 2.4Mm - 4.8Mm M7 Hydraulic Air Riveter 16mm Stroke 2.4 - 4.8mm Rivet M7-PA301 Features:Traction Power : 2303...

1" Drive 2500 ft lb Pin Less Air Impact Wrench with 8" Extended Anvil (NC-8382-8) by M7®. This product is made of high-quality materials to serve y...

FEATURES:Alloy steel anvil by special manufacturing processes to increase durabilityUnscrewing capability: 1500ft-lb reverse in 5 secondsSPECSSquar...

FEATURESBest in class performance for a tool of just 115.5 mm long and weight 1.6 Kg.The minimum size of this tool will allow greater access to tig...

+ Ultimate power reach 1000 ft-lb under 5 seconds.+ Dose the toughest job efficiently with durability & quality.icon+ Common applications inclu...

M7 Air Impact Wrench 3/4" Drive Twin Hammer 1500Ft Four-star rated for their powerful performance, Mighty Seven 3/4 in. drive quiet air impact wre...

FEATURESUnique design : The front housing and back head cover made by magnesium alloyRotor blades attached with springs which prolong durabilitySqu...

M7 AIR IMPACT WRENCH THROTTLE VALSE ASSEMBLY #9-15 FOR NC-6255Q

M7 Air Needle Scaler Anvil For Sn-2110

M7 Air Needle Scaler Needle & Holder Set 3Mm X 125Mm 12Pc For Sn-1288

M7 AIR NEEDLE SCALER REAR VALVE BLOCK FOR SN-1288