Expert Support
Available 7 Days
Expert Support
Available 7 Days
Wallbox EV Chargers NZ: The Complete Home Charging Guide
Electric vehicles are becoming a mainstream choice for New Zealand drivers — and with that comes the need for a reliable, smart home charging solution. Wallbox is one of the world's leading EV charging brands, trusted by hundreds of thousands of drivers globally. Here's a deep dive into the Wallbox Pulsar range available at LX2001, and how to choose the right charger for your home.
Why Wallbox?
Not all EV chargers are created equal. Wallbox stands out for several reasons:
- Up to 8x faster than a standard wall socket — a typical 3-pin plug delivers around 2.4 kW; Wallbox delivers up to 22 kW
- Smart scheduling — charge during off-peak hours to take advantage of lower electricity tariffs
- Solar charging compatible — pair with your solar panels to charge your EV with free, clean energy
- App-controlled — manage, monitor and schedule charging sessions from your phone via the myWallbox app
- Universal compatibility — works with any EV and any electrical installation
- Built for NZ conditions — IP55-rated weather and dust protection for indoor or outdoor installation
- Ultra-compact design — the smallest footprint in their class without compromising on power
The Wallbox Pulsar Range at LX2001
LX2001 stocks two models from the Wallbox Pulsar family — the Pulsar Plus and the Pulsar Max. Both are smart home chargers, but they're designed for different needs and electrical setups.
Wallbox Pulsar Plus — Smart Everyday Charging
View the Wallbox Pulsar Plus at LX2001 →
The Pulsar Plus is Wallbox's entry into smart home charging — compact, capable, and packed with connectivity features that make it a genuine upgrade over a standard wall socket or basic charger.
Key Specifications
- Charging power: Up to 7.4 kW (single phase) / 22 kW (three phase)
- Rated current: 32 A (7.4 kW) / 16 A (11 kW) / 32 A (22 kW)
- Cable length: 7 metres
- Connector type: Type 1 or Type 2 (IEC 62196-2)
- Weight: 1 kg (without cable)
- Dimensions: 166 x 163 x 82 mm
- Protection rating: IP54 / IK08
- Connectivity: Wi-Fi + Bluetooth
- Communication protocol: OCPP 1.6j
- Colour: White or Black
Standout Features
- myWallbox app control — start, stop, schedule and monitor charging from your smartphone
- Power Sharing — share available power between multiple chargers without overloading your home's electrical supply
- Power Boost (optional) — dynamically adjusts charging power based on your home's real-time energy consumption
- Dynamic Power Sharing (optional) — intelligently distributes power across multiple EVs
- MID Meter (optional) — certified energy metering for accurate billing or reimbursement
- OCPP 1.6j support — future-proof connectivity for fleet or commercial management
- RGB LED status indicator — at-a-glance charging status without opening the app
- Built-in earthing protection (7.4 kW version)
- DC residual current detection — 6 mA protection built in
- Local and remote lock/unlock
The 7-metre cable is a practical advantage — long enough to reach most parking configurations without an extension, and the Type 2 connector is compatible with the vast majority of EVs sold in New Zealand today.
Shop the Wallbox Pulsar Plus →
Wallbox Pulsar Max — Maximum Performance, Future-Proof Design
The Pulsar Max is Wallbox's flagship home charger — an evolution of the Pulsar Plus with a more powerful CPU, enhanced protection ratings, and a redesigned form factor that makes installation faster and easier.
Available in two configurations at LX2001:
- Wallbox Pulsar Max — Type 2, 5M, Black (Single Phase)
- Wallbox Pulsar Max — Type 2, 5M, Black (3 Phase)
Key Specifications
- Charging power: 7.4 kW (single phase) / 22 kW (three phase)
- Rated voltage: 220–240 V / 380–440 V AC ±10%
- Rated current: 32 A (1P) / 32 A (3P)
- Cable length: 5 metres
- Connector type: Type 1 or Type 2 (IEC 62196-2)
- Cable width: Up to 13 mm²
- Configurable current: 6 A to rated current
- Rated frequency: 50 Hz / 60 Hz
- Protection rating: IP55 / IK10
- Surge category: CAT III
- Residual current detection: DC 6 mA
- Connectivity: Bluetooth + Wi-Fi
- Finish: Scratch-resistant matte black
What Makes the Pulsar Max Different?
- Ultra-Fast Advanced CPU — built in-house by Wallbox specifically for EV charging; higher processing speeds and future-proof software updates
- Improved protection ratings — IP55 (vs IP54) and IK10 (vs IK08) means better resistance to water ingress and physical impact
- CAT III surge protection — rated for distribution board-level surge events, providing superior electrical protection
- Redesigned for easier installation — reduced installation time and cost for electricians
- Solar charging compatible — integrates with solar inverter systems to prioritise solar energy for charging
- Connector support included — keeps the cable tidy and off the ground when not in use
- Integrated DC leakage protection
- Local and remote lock/unlock
- Smart scheduling via myWallbox app
Shop the Wallbox Pulsar Max (Single Phase) →
Shop the Wallbox Pulsar Max (3 Phase) →
Pulsar Plus vs Pulsar Max: Which Should You Choose?
| Feature | Pulsar Plus | Pulsar Max |
|---|---|---|
| Max charging power | 7.4 kW / 22 kW | 7.4 kW / 22 kW |
| Cable length | 7 metres | 5 metres |
| Protection rating | IP54 / IK08 | IP55 / IK10 |
| Surge protection | Standard | CAT III |
| CPU | Standard | Ultra-Fast Advanced |
| Solar charging | No | Yes |
| OCPP 1.6j | Yes | Yes |
| Wi-Fi + Bluetooth | Yes | Yes |
| App control | Yes | Yes |
| Installation | Standard | Simplified |
| Finish | White or Black | Matte Black |
Choose the Pulsar Plus if: you want a proven, feature-rich smart charger with a longer 7-metre cable and optional Power Boost / Dynamic Power Sharing for multi-EV households.
Choose the Pulsar Max if: you have solar panels, want the latest CPU and firmware, need the highest protection ratings for outdoor installation, or want the simplest installation process for your electrician.
Single Phase vs Three Phase: What's Right for Your Home?
This is one of the most common questions when buying a home EV charger in New Zealand.
- Single phase (7.4 kW): Most NZ homes are single phase. At 7.4 kW, you'll add roughly 40–50 km of range per hour of charging — more than enough to top up overnight for typical daily driving.
- Three phase (22 kW): If your property has a three-phase supply (common in newer builds, rural properties, or homes with large appliances), you can charge at up to 22 kW — adding up to 130+ km of range per hour. Note: your EV also needs to support three-phase AC charging to benefit from this.
Not sure which supply you have? Your electrician can confirm this quickly, and it's worth checking before purchasing.
The myWallbox App
Both the Pulsar Plus and Pulsar Max are controlled via the myWallbox app (iOS and Android). Key capabilities include:
- Start and stop charging sessions remotely
- Schedule charging to run during off-peak electricity hours
- Monitor energy consumption and charging history
- Adjust charging current manually (from 6 A up to rated current)
- Lock and unlock the charger remotely
- Receive notifications on charging status
For households with solar panels, the Pulsar Max integrates with your solar system to automatically prioritise solar energy — reducing your charging cost to near zero on sunny days.
Installation: What to Expect
Wallbox chargers must be installed by a registered electrician in New Zealand. Here's what the process typically involves:
- Assessment of your home's electrical supply (single or three phase, available capacity)
- Installation of a dedicated circuit from your switchboard to the charger location
- Mounting the Wallbox unit (indoor or outdoor — both are supported)
- Connection to your Wi-Fi network and myWallbox app setup
The Pulsar Max's redesigned form factor specifically reduces installation time, which can translate to lower labour costs from your electrician.
Shop the Full Wallbox Range at LX2001
Browse all Wallbox EV chargers at LX2001 → lx2001.co.nz/collections/wallbox